FM® Plastic Expansion Anchors

Ten types of PE expansion anchor for masonry, plasterboard and hollow wall — metric sizes from 4mm to 17mm, plus an imperial range. FM plastic expansion anchors from Shanghai Zenyoo Trading.

Product Range — Ten Anchor Types


FM-Expansion-Plugs-v4.jpg

BK series, 4-16mm, with or without cap


FM-Capped-Bonded-v4.jpg

FM® Capped Bonded Expansion Pipe

5-10mm, bonding line keeps the body in one piece


FM-Fish-Shaped-v4.jpg

FM® Fish Shaped Expansion Pipe

6-10mm, lengths 30-250mm, yellow/white/grey


FM-Fish-Barbed-v4.jpg

FM® Fish Type Barbed Expansion Tube

6x30 / 8x40, fish-scale ribs along the shaft


FM-Double-Winged-v4.jpg

FM® Double Winged Expansion Tube

3/16, 1/4, 5/16 inch — imperial range


FM-Open-Barbed-v4.jpg

FM® Open Barbed Expansion Tube

5x18mm short form for shallow cavities


FM-Aircraft-v4.jpg

FM® Aircraft Expansion Pipe

10x29 / 10x35 / 10x45, with base thickness data


FM-Percussion-v4.jpg

FM® Percussion Expansion Tube

5-10mm, published pull-out load 100-300kg


FM-American-Super-v4.jpg

FM® American Super Expansion Pipe

5x22 to 8x38, stated dimensional tolerances


FM-Daywall-v4.jpg

FM® Daywall Plastic Anchor

6-17mm, top-open and centre-hole types

Technical Specifications


FM-Expansion-Plugs-v4.jpg

FM® Plastic Expansion Plugs — BK Series

The everyday ribbed PE expansion plug for solid brick, block and concrete. Twelve sizes from BK-04 to BK-B12, in white and grey.

Material: PE, made of polyethylene.   Color: white, grey.
Body types: with cap, without cap.

ITEM.NO      Length L (mm)      Outer Diameter D (mm)      Inner Diameter d (mm)
BK-04        20                  4                          3
BK-05        25                  5                          3.7
BK-06        30                  6                          4.2
BK-07        35                  7                          5
BK-08        40                  8                          5.7
BK-10        50                  10                         7.9
BK-12        60                  12                         9.6
BK-14        75                  14                         11.5
BK-16        80                  16                         13.5
BK-B06       28                  6.0                        4.9
BK-B08       35                  7.9                        5.3
BK-B10       40                  9.9                        5.8
BK-B12       45                  11.6                       6.3

Selection note: Match the outer diameter to the drill size and the inner diameter to the screw thread. The inner diameter is the thread the anchor grips, not the drill. For a metric M5 screw you want an inner diameter around 5mm, which in this range means the BK-08 or BK-B08.



FM-Capped-Bonded-v4.jpg

FM® Capped Bonded Expansion Pipe

Moulded with a bonding line that keeps the expanded section in one piece under load, so it holds better than a standard plug where a bracket carries working weight.

Material: PE, made of polyethylene.   Color: white, grey.
Body types: with cap, without cap.

ITEM.NO      Length L (mm)      Outer Diameter D (mm)      Inner Diameter d (mm)
5X32         32                  5                          3.5
6X36         36                  6                          4
8X50         50                  8                          5.5
10X60        60                  10                         7

Selection note: Choose this over a standard plug when the fixing carries a working load or when the screw will be driven hard. For a light cover plate or a sign, the standard expansion plug is usually sufficient and less costly.

Note: The catalogue table for this series is cropped after 10X60, so further sizes may exist. Specification to be confirmed.



FM-Fish-Shaped-v4.jpg

FM® Fish Shaped Expansion Pipe

Built for hollow substrates. The long lengths reach the solid material behind a cavity, which a short anchor cannot reach.

Material: PE, made of polyethylene.   Color: yellow, white, grey.

ITEM.NO      Length L (mm)      Outer Diameter D (mm)      Inner Diameter d (mm)
6X30         30                  6                          4
6X40         40                  6                          4.5
6X60         60                  6                          4.5
8X40         40                  8                          6
8X60         60                  8                          6
8X80         80                  8                          6
8X100        100                 8                          6
8X120        120                 8                          6
8X135        135                 8                          6
10X60        60                  10                         7.7
10X80        80                  10                         7.7
10X100       100                 10                         7.7
10X120       120                 10                         7.7
10X135       135                 10                         7.7
10X160       160                 10                         7.7
10X180       180                 10                         7.7
10X200       200                 10                         7.7
10X250       250                 10                         7.7

Selection note: Choose the length so the anchor reaches the solid material behind the cavity. As a rule the anchor should engage the solid material for at least its own length. A 250mm anchor in the 10mm series is specified for deep hollow block, not for a thin partition.



FM-Fish-Barbed-v4.jpg

FM® Fish Type Barbed Expansion Tube

Fish-scale ribs bite into the material behind the face, giving holding power in soft or thin substrates where a plain tapered anchor pulls out.

Material: PE, made of polyethylene.   Color: white, grey, yellow.

ITEM.NO      Length L (mm)      Outer Diameter D (mm)      Inner Diameter d (mm)
6X30         30                  6                          4.2
8X40         40                  8                          5.8

Selection note: Use this where a plain tapered anchor would pull out of the substrate. On plasterboard use a dedicated board anchor instead — barbs help in hollow masonry, but they will not hold in a weak board.



FM-Double-Winged-v4.jpg

FM® Double Winged Expansion Tube

Supplied in imperial sizes for projects written to North American specification. The two wings grip behind the face of a hollow wall.

Material: PE, made of polyethylene.   Color: white.
Note: outer diameter quoted in inches, inner diameter in millimetres.

ITEM.NO              Length L      Outer Diameter D      Inner Diameter d (mm)
3/16X7/8"            7/8"          3/16"                  3.5
1/4X1"               1"            1/4"                   4.5
5/16x1-1/4"          1-1/4"        5/16"                  5.8

Selection note: This range is for imperial specification. If your drawing is metric, use the BK series expansion plug instead — do not mix the two, because the outer diameter and the thread are quoted in different unit systems here.



FM-Open-Barbed-v4.jpg

FM® Open Barbed Expansion Tube

The short form of the barbed anchor, for shallow cavities and thin partitions where a longer anchor would not have room to expand.

Material: PE, made of polyethylene.   Color: white.

ITEM.NO      Length L (mm)      Outer Diameter D (mm)      Inner Diameter d (mm)
5X18         18                  6                          3

Selection note: The 18mm length suits shallow cavities and thin partitions. In a deep hollow block, or where a load is carried, move up to the fish shaped expansion pipe, which has a much wider length range.

Note: The catalogue lists the colour as grey in Chinese and White in English. Colour to be confirmed.



FM-Aircraft-v4.jpg

FM® Aircraft Expansion Pipe

Cross-wing head spreads load across the face of the wall. The table gives the suitable base thickness for every size — the detail that decides whether the fixing holds.

Material: PE, made of polyethylene.   Color: white.

ITEM.NO      Length L (mm)      Outer D (mm)      Inner d (mm)      Suitable base thickness A (mm)
10X29        29                  10                5                 8-12
10X35        35                  10                5                 14-20
10X45        45                  10                5                 20-30

Selection note: Read the base thickness column before you choose. If the cavity behind the wall is thicker than the range given, the anchor will not fully engage and the load drops — either move up a size or specify the fish shaped expansion pipe, which is designed to reach deeper into solid material.



FM-Percussion-v4.jpg

FM® Percussion Expansion Tube

Hammered into the hole with a matching zinc plated nail. Every size publishes a pull-out load in kilograms and a minimum drilling depth, so selection can be made on documented performance.

Material: high quality polyethylene PE.   Color: natural (white), other colours to order.
Application: drill the wall, insert the expansion tube, then tighten the screw.
Supplied with zinc plated steel nail.

Sink Head Screw      Drill      PLUG Length      Nail Type      Pullout Load (kgs)      Box qth (pcx)      Min. Drilling Depth
5x30                 5          30               3.5x35          100                     400/4800          45
5x40                 5          40               3.5x45          100                     400/4800          55
5x50                 5          50               3.5x55          100                     200/2400          65
6x40                 6          40               4.0x45          120                     200/2400          55
6x50                 6          50               4.0x55          120                     200/2400          65
6x60                 6          60               4.0x65          120                     200/2400          75
6x80                 6          80               4.0x85          120                     200/2400          95
8x60                 8          60               5.0x65          170                     100/1200          75
8x80                 8          80               5.0x85          170                     100/1200          95
8x100                8          100              5.0x105         170                     100/1200          115
8x120                8          120              5.0x125         170                     100/1200          135
10x80                10         80               6.0x85          300                     50/600            95
10x100               10         100              6.0x105         300                     50/600            115
10x120               10         120              6.0x125         300                     50/600            135
10x140               10         140              6.0x145         300                     50/600            155
10x160               10         160              6.0x165         300                     50/600            175

Selection note: Three numbers decide the size: the drill you need, the depth you must drill to, and the load you need to carry. Check the minimum drilling depth before you start — drilling short is the most common reason a percussion anchor fails to reach its pull-out load.



FM-American-Super-v4.jpg

FM® American Super Expansion Pipe

Manufactured to a stated tolerance — length ±1.5mm, outer diameter ±0.5mm, inner diameter ±0.2mm. Controlled screw engagement from the first carton to the last.

Material: PE, made of polyethylene.   Color: white, yellow, green.
Tolerance: length ±1.5mm, outer diameter ±0.5mm, inner diameter ±0.2mm.

ITEM.NO      Length L (mm)      Outer Diameter D (mm)      Inner Diameter d (mm)
5X22         22                  5                          3.4
6X25         25                  6                          3.8
6X30         30                  6                          4.7
6X32         32                  6                          4.8
8X38         38                  8                          6

Selection note: Specify this range when consistency of screw engagement matters, for example on a repeat installation across a production line. For heavier work the percussion range carries published load figures and is the better specification.



FM-Daywall-v4.jpg

FM® Daywall Plastic Anchor

Purpose-made for plasterboard, where the board itself is the weak element rather than the wall behind it. Top-open and centre-hole details.

Material: PE, made of polyethylene.   Color: white.
Types: standard, Top-open, Centro-hole.

Type ITEM.NO          Length L (mm)      Outer Diameter D (mm)
10X32                 32                  10
13X38                 38                  13
14X42                 42                  14
15X33                 33                  15
13X40                 40                  13
17X42                 42                  17
Top-open 16X38        38                  16
Centro-hole 6X36      36                  6
Centro-hole 8X50      50                  8
Centro-hole 10X60     60                  10

Selection note: Match the type to the fixture: centre-hole for anything that needs a flush screw head, top-open where the screw enters from above. And check the board thickness against the anchor length — an anchor longer than the board thickness cannot engage behind it.


Company

Terms & Conditions

Work With Us

Products

Pneumatic Components

Hydraulic Parts

About

News
Shop