6E00 Series

6200 Series

Robot joint servo Demo

This scheme is based on HPM6E8Y chip, which supports CiA402(CSV,CSP),

 FOE(OTA) and S curve. Protection functions: overcurrent, overvoltage,

 under voltage, over temperature, runaway and encoder disconnection. 

Support hpm_monitor_studio

Application scenario: focus on high power density servo drivers, specialized new

 power electronic devices, servo drive systems, drive chips, etc.

Scheme advantage

Superior CPU performance: high computing power and increased loop bandwidth.

High-precision PWM to improve the energy density of the driver 

QSPI is used to connect ESC chips at high speed.

16-bit ADC to improve current sampling accuracy 

Self-controllable: it can meet the requirements of domestic self-controllable.

Strong, timely and professional technical support ability.

6300 Series

6400/6700 Series

Application scenario:

Power Internet of Things gateway plays a vital role in modern power system. 

As the core node connecting power intelligent devices and sensors, it 

 undertakes important functions such as data transmission, communication,

 security and management. The power Internet of Things gateway series

 supports the 3G/4G wireless network, Ethernet and wifi networking of the three

 major operators, and supports the power 101 protocol and the power 104

 protocol, which are widely used in smart power scenarios such as power 

remote meter reading, substation and online monitoring of power lines.

Scheme advantage

Various interfaces are abundant: 17*UART, dual Gigabit Ethernet, CANFD*4,

 high-speed USB*2.

DMA performance: 2*8 DMA channels, all peripherals can be used, and data

 forwarding is efficient.

High computing power: strong edge computing ability, can do data  preprocessing.

Localization: adapted to the open Harmony OS system, pure localization.

Multi-media

LCD display controller, supporting up to 1366×768, 60fps display.

Graphics accelerator, which supports hardware acceleration such as graphics

 scaling, superposition and rotation.

JPEG hardware codec.

Binocular camera, improve AI image recognition ability.

4 8-channel full duplex |2S and 1 digital audio output.

Multi-channel voice and digital microphone interface is convenient to realize 

high-performance voice recognition application.

Application scenario: focus on high power density servo drivers, specialized new

 power electronic devices, servo drive systems, drive chips, etc.

Scheme advantage

Superior CPU performance: high computing power and increased loop bandwidth.

High-precision PWM to improve the energy density of the driver 

QSPI is used to connect ESC chips at high speed.

16-bit ADC to improve current sampling accuracy 

Self-controllable: it can meet the requirements of domestic self-controllable.

Strong, timely and professional technical support ability.

Application scenario:

Microcomputer protection measurement and control device integrates protection,

 measurement and control, and is suitable for user terminal substations (stations)

 with voltage levels of 35kV and below, which can realize the protection and

 measurement and control of user substations.

Scheme advantage

Strong computing power and fast frequency domain operation speed.

Abundant peripherals can be directly connected with various digital-analog signals.

Can directly drive the screen, with Ethernet transmission.

6800 Series

5300 Series

Application scenario:

Electronic rearview mirror (CMS)

Scheme advantage

Scheme advantage

Camera module:

OMNIVISION's OX03C10,1/2.6 inch optical format, 1920x1280 @60FPS, 3.0 μm,

 supports HDR, LFM and ASIL-C.

MAXIM Serilizer MAX96717F ASIL-B

The field of view of the lens is 60.

Support temperature sensor and PTC.

CMS motherboard:

Processor: HPMicro HPM68A0, 600MHz RISC-V, GPU, SD card, USB OTG, 2

 LVDS/MIPI display ports, 2 MIPI CSI inputs.

GPIO, GW5210 anomaly detection for detecting REV ILL ACC data.

ADC and GPIO control high-side switch WSQ7140, which is used for camera

 power distribution and PTC.

CANFD is used to communicate with the vehicle's CAN network and receive

 vehicle speed, steering wheel angle, turn signal lights, exterior mirror adjustment,

 exterior mirror preset, etc.

1Gbps Ethernet for OTA and diagnostics

600MHz RISC-V CPU for reasoning of target detection model

Four gestures are detected by 2 TOFs.

The deserializer MAX96714 receives the raw data from the camera module.

ISP GW5210, high performance IQ. HDR、LFM、AWB/AE

Distortion, OSD, pan/tilt/zoom

Camera fault detection

Output 1280 x 720 60fps YUV422 to CPU.

Bypass the original data of camera module to ADAS/E-cockpi.

Application scenario: Inertial navigation module

Scheme advantage

High performance CPU, high frequency and high computing power meet the requirements of IMU computing power.

Rich communication interface, SPI, UART, etc.

Smaller package, QFN48 6X6

Cost effective products, 100% localization

Application scenario: Vehicle-mounted digital instrument display

Scheme advantage

Fast boot: the cold start is less than 100ms, and the above the fold content is

 displayed within 500ms.

The maximum resolution is 1920*1080, which can refresh the pointer at 60fps and

 the traffic information at 30fps.

Support video input, and realize the functions of reversing video and central control

 interconnection and interaction.

Commercial HMI graphic software, WYSIWYG, improves development efficiency.

Production-level low-level SDK software package and middleware, with optional

 UDS software protocol stack.

Support OTA upgrade

Provide one-stop service cooperation mode: including instrument scheme

 development board, core board, professional technical support of automobile

 instrument development team, and have the ability to deliver Turnkey.

Application scenario: Portable energy storage

Scheme advantage

On-chip peripherals suitable for power supply, such as high-precision PWM and 16b ADC.

Small package

Timely technical support ability

Application scenario: Absolute Position encoder

Scheme advantage

Absolute encoder is used in automatic production line, and supports BISS-C, SSI and

 other protocols through RS422 interface.

Application scenarios: servo drivers, robots, etc.

Scheme advantage

16b ADC, 2MSPS, used to collect position sensor signals.

Peripheral devices suitable for encoder: on-chip operational amplifier, QEI, QEO.

Unique SEI module supports Tamagawa, SSI, Endat and other protocols.